2010-2024 Toyota 4Runner Steering Angle Sensor Torque Specs

4.0L V6

Applies to 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, and 2024 Toyota 4Runner

Labor Time:1.1 hours

Torque Values (16 specifications)

Component	Nm	lb-ft	Notes
Cover Screws	12	9	—
Cover Screws	12	9	—
Mounting Bolts	31	23	—
Mounting Bolts	31	23	—
⚠️ Power Steering Line Fittings	30	22	Use new O-rings \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
Power Steering Line Fittings	30	22	Use new O-rings \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Rack Bolts	117	86	—
Rack Bolts	117	86	—
⚠️ Steering Rack Bolts	100	74	⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
Steering Rack Bolts	100	74	⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Tie Rod End Castle Nut	55	41	Use new cotter pin \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
Tie Rod End Castle Nut	55	41	Use new cotter pin \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
Tie Rod Nut	62	46	—
⚠️ Tie Rod Nut	62	46	—
⚠️ Wheel Lug Nuts	156	115	—
Wheel Lug Nuts	156	115	—

The primary torque specification for steering angle sensor on a 2010-2024 Toyota 4Runner is 12 Nm (9 lb-ft).

There are 16 torque specifications for steering angle sensor on the 2010-2024 Toyota 4Runner 4.0L V6, covering all related fasteners and components.