2001-2007 Toyota Sequoia Engine Mount - Rear Torque Specs

4.7L V8

Applies to 2001, 2002, 2003, 2004, 2005, 2006, and 2007 Toyota Sequoia

Labor Time:1.9 hours

Torque Values (20 specifications)

Component	Nm	lb-ft	Notes
Cover Bolts	16	12	—
Cover Bolts	16	12	—
Electrical Connector Bolts	7	5	—
Electrical Connector Bolts	7	5	—
⚠️ Engine Mount-to-Block Bolts	65	48	—
Engine Mount-to-Block Bolts	65	48	—
⚠️ Engine Mount-to-Frame Bolts	75	55	—
Engine Mount-to-Frame Bolts	75	55	—
Gasket Surface Bolts	20	15	Clean mating surfaces
⚠️ Gasket Surface Bolts	20	15	Clean mating surfaces
Mount Through Bolt	88	65	—
⚠️ Mount Through Bolt	88	65	—
Mount-to-Frame Bolts	61	45	—
⚠️ Mount-to-Frame Bolts	61	45	—
⚠️ Mounting Bolts	47	35	—
Mounting Bolts	47	35	—
Sensor Bolts	11	8	—
Sensor Bolts	11	8	—
Sensor Mounting Bolts	11	8	—
Sensor Mounting Bolts	11	8	—

The primary torque specification for engine mount - rear on a 2001-2007 Toyota Sequoia is 16 Nm (12 lb-ft).

There are 20 torque specifications for engine mount - rear on the 2001-2007 Toyota Sequoia 4.7L V8, covering all related fasteners and components.