Steering Angle Sensor Torque Specifications

2001-2007 Toyota Sequoia 4.7L V8

Labor Time:1.2 hours

Torque Values (22 specifications)

Component	Nm	lb-ft	Notes
⚠️ Coupling Bolt	34	25	—
Coupling Bolt	34	25	—
Cover Screws	11	8	—
Cover Screws	11	8	—
Mounting Bolts	27	20	—
Mounting Bolts	27	20	—
⚠️ Power Steering Line Fittings	30	22	Use new O-rings \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
Power Steering Line Fittings	30	22	Use new O-rings \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Rack Bolts	102	75	—
Rack Bolts	102	75	—
Rack Mounting Bolts	102	75	—
⚠️ Rack Mounting Bolts	102	75	—
Steering Rack Bolts	100	74	⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Steering Rack Bolts	100	74	⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Tie Rod End Castle Nut	55	41	Use new cotter pin \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
Tie Rod End Castle Nut	55	41	Use new cotter pin \| ⚠️ VERIFY SEQUENCE WITH SERVICE MANUAL
⚠️ Tie Rod End Nut	54	40	Use new cotter pin
Tie Rod End Nut	54	40	Use new cotter pin
⚠️ Tie Rod Nut	54	40	—
Tie Rod Nut	54	40	—
⚠️ Wheel Lug Nuts	136	100	—
Wheel Lug Nuts	136	100	—

The primary torque specification for steering angle sensor on a 2001-2007 Toyota Sequoia is 34 Nm (25 lb-ft).

There are 22 torque specifications for steering angle sensor on the 2001-2007 Toyota Sequoia 4.7L V8, covering all related fasteners and components.