P1107
BARO Sensor Circuit Low Input
2001-2003 Acura CL 3.2L V6
Moderate SeverityPowertrain
Description
The BARO sensor voltage is below minimum threshold.
Symptoms
- CEL
- Poor performance
- Rough idle
- Hesitation
Common Causes
- Short to ground
- Faulty sensor
- Poor connection
- Faulty PCM
Diagnostic Steps
- Check sensor voltage
- Test for shorts
- Inspect connector
- Test PCM
Repair Notes
Repair short or replace sensor.
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
P1107 on Other Vehicles
Common Questions
What does code P1107 mean on a 2001-2003 Acura CL?
P1107 stands for "BARO Sensor Circuit Low Input". The BARO sensor voltage is below minimum threshold.
What are the symptoms of P1107 on a Acura CL?
Common symptoms of P1107 include: CEL, Poor performance, Rough idle, Hesitation.
What causes P1107 on a 2001-2003 Acura CL?
Common causes of P1107 include: Short to ground, Faulty sensor, Poor connection, Faulty PCM.