P1382
Cylinder Position Sensor A No Signal
2001-2003 Acura CL 3.2L V6
High SeverityPowertrain
Description
No signal from CYP sensor A. Sequential injection timing cannot be controlled.
Symptoms
- CEL
- Rough running
- Multi-cylinder misfires
- Poor performance
- Possible no-start
Common Causes
- Faulty CYP sensor
- Failed distributor
- Cut wiring
- Corroded connector
Diagnostic Steps
- Test sensor output
- Inspect wiring
- Check distributor
- Test PCM input
Repair Notes
Replace distributor assembly.
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
P1382 on Other Vehicles
Common Questions
What does code P1382 mean on a 2001-2003 Acura CL?
P1382 stands for "Cylinder Position Sensor A No Signal". No signal from CYP sensor A. Sequential injection timing cannot be controlled.
What are the symptoms of P1382 on a Acura CL?
Common symptoms of P1382 include: CEL, Rough running, Multi-cylinder misfires, Poor performance, Possible no-start.
What causes P1382 on a 2001-2003 Acura CL?
Common causes of P1382 include: Faulty CYP sensor, Failed distributor, Cut wiring, Corroded connector.