P1362critical severityPowertrain
TDC Sensor 1 No Signal
on 2018 Acura TLX 2.4L I4 · AWD
What this code means
No signal received from TDC sensor 1. Engine runs in limited mode.
Symptoms
- CEL
- Limp mode
- Power drops at 3500 RPM
- Rough running
- Difficulty starting
Common causes
- Faulty TDC sensor
- Damaged wiring
- Failed distributor
- Timing belt issue
Diagnostic steps
- Test sensor output
- Inspect wiring
- Check distributor
- Verify timing
Repair notes
Replace distributor assembly.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0011
Intake Camshaft Position Timing Over-Advanced Bank 1
P0012
Intake Camshaft Position Timing Over-Retarded Bank 1
P0013
Exhaust Camshaft Position Actuator Circuit/Open Bank 1
P0014
Exhaust Camshaft Position Timing Over-Advanced Bank 1
P0015
Exhaust Camshaft Position Timing Over-Retarded Bank 1