P2401
EVAP Leak Detection Pump Control Circuit Low
2004-2016 Aston Martin DB9 6.0L V12
Moderate SeverityPowertrainGeneric (SAE)
Description
Low voltage on the EVAP leak detection pump control circuit.
Symptoms
- Check engine light
- Failed EVAP test
Common Causes
- Short to ground
- Damaged harness
- Pump motor failure
Diagnostic Steps
- Measure circuit voltage
- Check for shorts to ground
- Test pump
Repair Notes
Repair short or replace pump.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
P2401 on Other Vehicles
Aston Martin DB11
2016-2024 4.0L V8 Twin Turbo
Aston Martin DB11
2016-2024 5.2L V12 Twin Turbo
Aston Martin DB7
1994-2003 3.2L I6 Supercharged
Aston Martin DBS Superleggera
2019-2024 5.2L V12 Twin Turbo
Aston Martin DBX
2020-2024 4.0L V8 Twin Turbo
Aston Martin Vantage
2005-2024 4.7L V8
Aston Martin Vantage
2018-2024 4.0L V8 Twin Turbo
Common Questions
What does code P2401 mean on a 2004-2016 Aston Martin DB9?
P2401 stands for "EVAP Leak Detection Pump Control Circuit Low". Low voltage on the EVAP leak detection pump control circuit.
What are the symptoms of P2401 on a Aston Martin DB9?
Common symptoms of P2401 include: Check engine light, Failed EVAP test.
What causes P2401 on a 2004-2016 Aston Martin DB9?
Common causes of P2401 include: Short to ground, Damaged harness, Pump motor failure.