CVT Secondary Pulley Speed Sensor Circuit
2004-2016 Aston Martin DB9 6.0L V12
Description
The secondary (output) pulley speed sensor in the CVT is malfunctioning.
Symptoms
- Check Engine Light
- Incorrect speed display
- Transmission ratio errors
- Harsh ratio changes
- Limp mode
- No speedometer reading
Common Causes
- Faulty secondary speed sensor
- Damaged wiring
- Tone ring contamination
- Corroded connector
- Sensor air gap incorrect
Diagnostic Steps
- Read secondary pulley speed PID
- Test sensor resistance
- Inspect wiring and connector
- Check tone ring condition
- Compare to vehicle speed sensor
Repair Notes
Replace secondary pulley speed sensor.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
P3022 on Other Vehicles
Aston Martin DB11
2016-2024 4.0L V8 Twin Turbo
Aston Martin DB11
2016-2024 5.2L V12 Twin Turbo
Aston Martin DB7
1994-2003 3.2L I6 Supercharged
Aston Martin DBS Superleggera
2019-2024 5.2L V12 Twin Turbo
Aston Martin DBX
2020-2024 4.0L V8 Twin Turbo
Aston Martin Vantage
2005-2024 4.7L V8
Aston Martin Vantage
2018-2024 4.0L V8 Twin Turbo
Common Questions
What does code P3022 mean on a 2004-2016 Aston Martin DB9?
P3022 stands for "CVT Secondary Pulley Speed Sensor Circuit". The secondary (output) pulley speed sensor in the CVT is malfunctioning.
What are the symptoms of P3022 on a Aston Martin DB9?
Common symptoms of P3022 include: Check Engine Light, Incorrect speed display, Transmission ratio errors, Harsh ratio changes, Limp mode, No speedometer reading.
What causes P3022 on a 2004-2016 Aston Martin DB9?
Common causes of P3022 include: Faulty secondary speed sensor, Damaged wiring, Tone ring contamination, Corroded connector, Sensor air gap incorrect.