Fuel Trim Load Group Above Limit Bank 1
2014-2014 Audi A6 3.0L Supercharged V6
The 2014 Audi A6 is equipped with a 3.0L V6 engine. Below you'll find detailed p1141 diagnostic code information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.
Description
The ECU detected that the fuel trim adaptation value for a specific load group on Bank 1 has exceeded its allowable range. This is a more granular fuel trim fault than general lean/rich codes.
Symptoms
- Check Engine Light
- Poor driveability at specific load points
- Rough running under load
- Possible misfire at certain RPM ranges
Common Causes
- Vacuum leak that worsens under load
- Fuel injector performance degradation
- MAF sensor drift at specific airflow ranges
- Intake manifold flap issue
- Fuel pump losing pressure under load
Diagnostic Steps
- Monitor fuel trims across RPM and load ranges
- Perform boost leak test on turbocharged models
- Test fuel pressure under load
- Check MAF sensor readings vs specifications
- Inspect intake manifold flaps
Repair Notes
Address the load-specific fuel trim issue by repairing vacuum leaks or replacing degraded components.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
P1141 on Other Vehicles
Common Questions
What does code P1141 mean on a 2014-2014 Audi A6?
P1141 stands for "Fuel Trim Load Group Above Limit Bank 1". The ECU detected that the fuel trim adaptation value for a specific load group on Bank 1 has exceeded its allowable range. This is a more granular fuel trim fault than general lean/rich codes.
What are the symptoms of P1141 on a Audi A6?
Common symptoms of P1141 include: Check Engine Light, Poor driveability at specific load points, Rough running under load, Possible misfire at certain RPM ranges.
What causes P1141 on a 2014-2014 Audi A6?
Common causes of P1141 include: Vacuum leak that worsens under load, Fuel injector performance degradation, MAF sensor drift at specific airflow ranges, Intake manifold flap issue, Fuel pump losing pressure under load.
Last updated: March 2026