P2122critical severityPowertrain
Throttle/Pedal Position Sensor/Switch D Circuit Low
on 2020 Audi R8 5.2L V10 (Gen 1, 525hp) · AWD
What this code means
Low voltage from accelerator pedal position sensor D.
Symptoms
- Limp mode
- Engine at idle
- Check engine light
Common causes
- Failed APP sensor
- Short to ground in wiring
- Corroded connector
Diagnostic steps
- Measure voltage at APP sensor D
- Check wiring
- Swap sensor if dual-assembly
Repair notes
Replace accelerator pedal assembly or repair wiring.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0011
Intake Camshaft Position Timing Over-Advanced Bank 1
P0012
Intake Camshaft Position Timing Over-Retarded Bank 1
P0013
Exhaust Camshaft Position Actuator Circuit/Open Bank 1
P0014
Exhaust Camshaft Position Timing Over-Advanced Bank 1
P0015
Exhaust Camshaft Position Timing Over-Retarded Bank 1