C0082
Steering Torque Sensor Signal Invalid
2019-2024 BMW 3 Series G20 2.0L I4 Turbo B48
High SeverityChassisGeneric (SAE)
Description
The steering torque sensor signal is implausible or does not match expected values.
Symptoms
- EPS warning light
- Steering assist intermittent
- Power steering cuts out momentarily
- Stability control affected
Common Causes
- Torque sensor calibration lost
- Sensor mechanical damage
- Connector pin damage
- Electromagnetic interference near sensor
Diagnostic Steps
- Monitor torque sensor live data during steering input
- Check for smooth, proportional signal response
- Inspect connector for bent or damaged pins
- Check for electromagnetic interference sources
- Perform sensor recalibration if supported
Repair Notes
Recalibrate torque sensor. Replace if signal remains erratic.
Related Codes
Other Chassis Codes
- C0021LF Wheel Speed Sensor Range/Performance
- C0022RF Wheel Speed Sensor Range/Performance
- C0023LR Wheel Speed Sensor Range/Performance
- C0024RR Wheel Speed Sensor Range/Performance
- C0025LF Wheel Speed Sensor Circuit Intermittent
- C0026RF Wheel Speed Sensor Circuit Intermittent
- C0027LR Wheel Speed Sensor Circuit Intermittent
- C0028RR Wheel Speed Sensor Circuit Intermittent
- C0035Left Front Wheel Speed Sensor Circuit
- C0036Left Front Wheel Speed Signal Erratic
C0082 on Other Vehicles
Common Questions
What does code C0082 mean on a 2019-2024 BMW 3 Series G20?
C0082 stands for "Steering Torque Sensor Signal Invalid". The steering torque sensor signal is implausible or does not match expected values.
What are the symptoms of C0082 on a BMW 3 Series G20?
Common symptoms of C0082 include: EPS warning light, Steering assist intermittent, Power steering cuts out momentarily, Stability control affected.
What causes C0082 on a 2019-2024 BMW 3 Series G20?
Common causes of C0082 include: Torque sensor calibration lost, Sensor mechanical damage, Connector pin damage, Electromagnetic interference near sensor.