C0105
Brake Pedal Position Sensor Circuit Low
2019-2024 BMW 3 Series G20 2.0L I4 Turbo B48
Moderate SeverityChassisGeneric (SAE)
Description
The brake pedal position sensor signal voltage is below the minimum threshold.
Symptoms
- ABS light on
- Brake assist fault
- Module reads brake as always applied
Common Causes
- Short to ground in sensor circuit
- Faulty sensor
- Low supply voltage to sensor
Diagnostic Steps
- Test sensor signal voltage
- Check for shorts to ground
- Verify supply voltage at sensor
- Inspect wiring harness
Repair Notes
Repair short circuit or replace brake pedal position sensor.
Related Codes
Other Chassis Codes
- C0021LF Wheel Speed Sensor Range/Performance
- C0022RF Wheel Speed Sensor Range/Performance
- C0023LR Wheel Speed Sensor Range/Performance
- C0024RR Wheel Speed Sensor Range/Performance
- C0025LF Wheel Speed Sensor Circuit Intermittent
- C0026RF Wheel Speed Sensor Circuit Intermittent
- C0027LR Wheel Speed Sensor Circuit Intermittent
- C0028RR Wheel Speed Sensor Circuit Intermittent
- C0035Left Front Wheel Speed Sensor Circuit
- C0036Left Front Wheel Speed Signal Erratic
C0105 on Other Vehicles
Common Questions
What does code C0105 mean on a 2019-2024 BMW 3 Series G20?
C0105 stands for "Brake Pedal Position Sensor Circuit Low". The brake pedal position sensor signal voltage is below the minimum threshold.
What are the symptoms of C0105 on a BMW 3 Series G20?
Common symptoms of C0105 include: ABS light on, Brake assist fault, Module reads brake as always applied.
What causes C0105 on a 2019-2024 BMW 3 Series G20?
Common causes of C0105 include: Short to ground in sensor circuit, Faulty sensor, Low supply voltage to sensor.