P0017
Crankshaft Position/Camshaft Position Correlation Bank 1 Sensor B
2006-2011 BMW 325i 3.0L I6 N52
Critical SeverityPowertrainGeneric (SAE)
Description
The crankshaft and Bank 1 exhaust camshaft position signals do not correlate properly.
Symptoms
- Check Engine Light
- Rough running
- Engine noise
- No start condition
Common Causes
- Timing chain issue
- Exhaust VVT solenoid failure
- Sensor failure
- Worn timing components
Diagnostic Steps
- Check timing chain alignment
- Test exhaust VVT solenoid
- Inspect sensors
- Check oil condition
Repair Notes
Repair timing system or VVT components.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
P0017 on Other Vehicles
Common Questions
What does code P0017 mean on a 2006-2011 BMW 325i?
P0017 stands for "Crankshaft Position/Camshaft Position Correlation Bank 1 Sensor B". The crankshaft and Bank 1 exhaust camshaft position signals do not correlate properly.
What are the symptoms of P0017 on a BMW 325i?
Common symptoms of P0017 include: Check Engine Light, Rough running, Engine noise, No start condition.
What causes P0017 on a 2006-2011 BMW 325i?
Common causes of P0017 include: Timing chain issue, Exhaust VVT solenoid failure, Sensor failure, Worn timing components.