Idle Control Valve Position Circuit
2006-2011 BMW 325i 3.0L I6 N52
Description
The DME detected a malfunction in the idle control valve (ICV) position circuit. The ICV regulates airflow at idle to maintain a stable engine speed. On BMW engines, this is commonly caused by a sticking or carbon-fouled valve.
Symptoms
- Rough or unstable idle
- Engine stalling at idle
- Idle speed too high or too low
- Check Engine Light
Common Causes
- Carbon-fouled idle control valve
- Faulty idle control valve motor
- Wiring issue to ICV
- Vacuum leak affecting idle
- DME output driver failure
Diagnostic Steps
- Test ICV operation by commanding open/close with scan tool
- Measure ICV motor resistance
- Clean ICV with throttle body cleaner
- Check vacuum lines around throttle body
- Inspect ICV wiring
Repair Notes
Clean the idle control valve with throttle body cleaner; replace if cleaning does not resolve the issue.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
P1519 on Other Vehicles
Common Questions
What does code P1519 mean on a 2006-2011 BMW 325i?
P1519 stands for "Idle Control Valve Position Circuit". The DME detected a malfunction in the idle control valve (ICV) position circuit. The ICV regulates airflow at idle to maintain a stable engine speed. On BMW engines, this is commonly caused by a sticking or carbon-fouled valve.
What are the symptoms of P1519 on a BMW 325i?
Common symptoms of P1519 include: Rough or unstable idle, Engine stalling at idle, Idle speed too high or too low, Check Engine Light.
What causes P1519 on a 2006-2011 BMW 325i?
Common causes of P1519 include: Carbon-fouled idle control valve, Faulty idle control valve motor, Wiring issue to ICV, Vacuum leak affecting idle, DME output driver failure.