P2422
EVAP Vent Valve Stuck Closed
2006-2011 BMW 325i 3.0L I6 N52
Moderate SeverityPowertrainGeneric (SAE)
Description
The EVAP canister vent valve is stuck in the closed position.
Symptoms
- Fuel tank pressure buildup
- Difficulty refueling
- Check engine light
- Hissing from fuel cap area
Common Causes
- Failed vent valve/solenoid
- Blocked vent line
- Debris in valve
- Spider/insect nest in vent
Diagnostic Steps
- Command vent valve open with scan tool
- Listen for solenoid click
- Check vent hose for blockage
Repair Notes
Replace vent valve solenoid. Inspect vent line for obstruction.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
P2422 on Other Vehicles
Common Questions
What does code P2422 mean on a 2006-2011 BMW 325i?
P2422 stands for "EVAP Vent Valve Stuck Closed". The EVAP canister vent valve is stuck in the closed position.
What are the symptoms of P2422 on a BMW 325i?
Common symptoms of P2422 include: Fuel tank pressure buildup, Difficulty refueling, Check engine light, Hissing from fuel cap area.
What causes P2422 on a 2006-2011 BMW 325i?
Common causes of P2422 include: Failed vent valve/solenoid, Blocked vent line, Debris in valve, Spider/insect nest in vent.