GDI Fuel Rail Pressure Too Low During Cranking
2006-2011 BMW 328i 3.0L I6 N52
Description
The fuel rail pressure in the GDI system does not reach the minimum required pressure during engine cranking.
Symptoms
- Extended cranking time
- No start condition
- Rough start then smooths out
- Fuel rail pressure reads low on scan tool
- May start after multiple attempts
Common Causes
- Worn high-pressure fuel pump
- Fuel injector leaking back
- Rail pressure sensor error
- Low-pressure supply pump weak
- Fuel check valve leaking
Diagnostic Steps
- Monitor rail pressure during cranking
- Check low-pressure fuel supply
- Test fuel injector leak-back
- Inspect high-pressure pump cam follower
- Measure cranking RPM
Repair Notes
{"Replace high-pressure fuel pump. Test fuel injectors for leak-back. Ensure low-pressure supply exceeds minimum feed pressure."}
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
P3651 on Other Vehicles
Common Questions
What does code P3651 mean on a 2006-2011 BMW 328i?
P3651 stands for "GDI Fuel Rail Pressure Too Low During Cranking". The fuel rail pressure in the GDI system does not reach the minimum required pressure during engine cranking.
What are the symptoms of P3651 on a BMW 328i?
Common symptoms of P3651 include: Extended cranking time, No start condition, Rough start then smooths out, Fuel rail pressure reads low on scan tool, May start after multiple attempts.
What causes P3651 on a 2006-2011 BMW 328i?
Common causes of P3651 include: Worn high-pressure fuel pump, Fuel injector leaking back, Rail pressure sensor error, Low-pressure supply pump weak, Fuel check valve leaking.