ShopBaseFree forever shop management software for auto repair shops
Try ShopBase Free β†’
P3600

Auto Start-Stop System Malfunction

2012-2018 BMW 328i 2.0L Turbo I4

Low SeverityPowertrainGeneric (SAE)

Description

The automatic engine start-stop system has been disabled due to a detected fault. The system shuts off the engine at stops to save fuel.

Symptoms

  • Start-stop indicator shows fault
  • Engine does not shut off at stops
  • Start-stop disabled message on dash
  • Slightly higher fuel consumption
  • Start-stop light flashing

Common Causes

  • Weak 12V battery
  • Battery sensor failure
  • Starter motor wear
  • Engine temperature out of range
  • Brake vacuum insufficient

Diagnostic Steps

  1. Read start-stop system status and inhibit reasons
  2. Test 12V battery state of health
  3. Check IBS (intelligent battery sensor)
  4. Monitor brake vacuum level
  5. Check starter motor engagement count

Repair Notes

Replace 12V battery if state of health is low. Register new battery with BMS. Replace IBS if faulty.

Related Codes

P3601Auto Start-Stop Restart FailureP3602Intelligent Battery Sensor (IBS) Circuit MalfunctionP3603Enhanced Starter Motor Control Module Fault

Other Powertrain Codes

P3600 on Other Vehicles

Common Questions

What does code P3600 mean on a 2012-2018 BMW 328i?

P3600 stands for "Auto Start-Stop System Malfunction". The automatic engine start-stop system has been disabled due to a detected fault. The system shuts off the engine at stops to save fuel.

What are the symptoms of P3600 on a BMW 328i?

Common symptoms of P3600 include: Start-stop indicator shows fault, Engine does not shut off at stops, Start-stop disabled message on dash, Slightly higher fuel consumption, Start-stop light flashing.

What causes P3600 on a 2012-2018 BMW 328i?

Common causes of P3600 include: Weak 12V battery, Battery sensor failure, Starter motor wear, Engine temperature out of range, Brake vacuum insufficient.

View Labor Times | View Torque Specs | View Fluid Specs