C0220
EPS Control Module Internal Fault
2002-2003 BMW X5 4.6is E53 4.6L V8
High SeverityChassisGeneric (SAE)
Description
The electric power steering control module has detected an internal error.
Symptoms
- EPS warning light
- Reduced or no power steering assist
- EPS assist may be intermittent
- Warning message on dash
Common Causes
- EPS module internal component failure
- Module overheating
- Software error
- Power supply voltage spike or drop
Diagnostic Steps
- Check module power supply voltage
- Inspect module grounds
- Check for module overheating
- Attempt module reset by cycling ignition
- Check for software update availability
Repair Notes
Replace EPS control module. Program and calibrate after installation.
Related Codes
Other Chassis Codes
- C0021LF Wheel Speed Sensor Range/Performance
- C0022RF Wheel Speed Sensor Range/Performance
- C0023LR Wheel Speed Sensor Range/Performance
- C0024RR Wheel Speed Sensor Range/Performance
- C0025LF Wheel Speed Sensor Circuit Intermittent
- C0026RF Wheel Speed Sensor Circuit Intermittent
- C0027LR Wheel Speed Sensor Circuit Intermittent
- C0028RR Wheel Speed Sensor Circuit Intermittent
- C0035Left Front Wheel Speed Sensor Circuit
- C0036Left Front Wheel Speed Signal Erratic
C0220 on Other Vehicles
Common Questions
What does code C0220 mean on a 2002-2003 BMW X5 4.6is E53?
C0220 stands for "EPS Control Module Internal Fault". The electric power steering control module has detected an internal error.
What are the symptoms of C0220 on a BMW X5 4.6is E53?
Common symptoms of C0220 include: EPS warning light, Reduced or no power steering assist, EPS assist may be intermittent, Warning message on dash.
What causes C0220 on a 2002-2003 BMW X5 4.6is E53?
Common causes of C0220 include: EPS module internal component failure, Module overheating, Software error, Power supply voltage spike or drop.