P1884low severityPowertrain
TCC Enable / Shift Light Circuit
on 1998 Buick Century 3.1L V6 · FWD
What this code means
The TCM detected a fault in the TCC enable or shift indicator light circuit.
Symptoms
- Shift light not working
- Check Engine Light
- TCC not engaging properly
Common causes
- Burnt out shift indicator bulb
- Wiring issue to indicator light
- TCM driver failure
Diagnostic steps
- Test shift light bulb
- Check circuit wiring
- Test TCM output for shift light
Repair notes
Replace shift indicator bulb or repair wiring.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0011
Intake Camshaft Position Timing Over-Advanced Bank 1
P0012
Intake Camshaft Position Timing Over-Retarded Bank 1
P0013
Exhaust Camshaft Position Actuator Circuit/Open Bank 1
P0014
Exhaust Camshaft Position Timing Over-Advanced Bank 1
P0015
Exhaust Camshaft Position Timing Over-Retarded Bank 1