P0733
Gear 3 Incorrect Ratio
2010-2010 Buick Enclave 3.6L V6
High SeverityPowertrainGeneric (SAE)
The 2010 Buick Enclave is equipped with a 3.6L V6 engine. Below you'll find detailed p0733 diagnostic code information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.
Description
Incorrect gear ratio detected in 3rd gear.
Symptoms
- Slipping in 3rd
- Shift problems
Common Causes
- 3rd gear components worn
- Solenoid issue
Diagnostic Steps
- Monitor gear ratio
- Test solenoids
Repair Notes
Service transmission.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
P0733 on Other Vehicles
Common Questions
What does code P0733 mean on a 2010-2010 Buick Enclave?
P0733 stands for "Gear 3 Incorrect Ratio". Incorrect gear ratio detected in 3rd gear.
What are the symptoms of P0733 on a Buick Enclave?
Common symptoms of P0733 include: Slipping in 3rd, Shift problems.
What causes P0733 on a 2010-2010 Buick Enclave?
Common causes of P0733 include: 3rd gear components worn, Solenoid issue.
Last updated: March 2026