B0095
Driver Door Lock Circuit
2019-2019 Buick Enclave 3.6L V6
Low SeverityBodyGeneric (SAE)
The 2019 Buick Enclave is equipped with a 3.6L V6 engine. Below you'll find detailed b0095 diagnostic code information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.
Description
Malfunction in the driver door lock actuator or circuit.
Symptoms
- Door lock not working
- Lock clicking but not engaging
- Remote lock not working
Common Causes
- Faulty lock actuator
- Wiring damage
- Door lock switch failure
- BCM issue
Diagnostic Steps
- Test lock actuator
- Check wiring in door jamb area
- Test switch
- Check BCM output
Repair Notes
Replace door lock actuator. Check wiring in door harness.
Other Body Codes
- B0001Driver Frontal Stage 1 Deployment Control
- B0002Driver Frontal Stage 2 Deployment Control
- B0003Passenger Frontal Stage 1 Deployment Control
- B0004Passenger Frontal Stage 2 Deployment Control
- B0005Driver Knee Airbag Deployment Circuit
- B0006Passenger Knee Airbag Deployment Circuit
- B0007Rear Left Side Airbag Deployment Circuit
- B0008Rear Right Side Airbag Deployment Circuit
- B0009Rear Center Airbag Deployment Circuit
- B0010Driver Side Airbag Deployment
B0095 on Other Vehicles
Common Questions
What does code B0095 mean on a 2019-2019 Buick Enclave?
B0095 stands for "Driver Door Lock Circuit". Malfunction in the driver door lock actuator or circuit.
What are the symptoms of B0095 on a Buick Enclave?
Common symptoms of B0095 include: Door lock not working, Lock clicking but not engaging, Remote lock not working.
What causes B0095 on a 2019-2019 Buick Enclave?
Common causes of B0095 include: Faulty lock actuator, Wiring damage, Door lock switch failure, BCM issue.
Last updated: March 2026