PCM Battery Direct Power Circuit
2004-2007 Buick Rainier 4.2L I6
Description
The PCM detected an issue with its direct battery power supply circuit. This circuit maintains PCM memory and learned values when the ignition is off.
Symptoms
- Check Engine Light
- Lost adaptive memory
- Poor idle after battery service
- Transmission relearn needed
- Multiple codes may set simultaneously
Common Causes
- Low battery voltage
- Corroded battery cables
- Loose PCM power connection
- Blown PCM power fuse
- Damaged PCM power wiring
Diagnostic Steps
- Test battery voltage
- Inspect battery cable connections
- Check PCM power fuse
- Test voltage at PCM battery circuit
- Inspect PCM connector for corrosion
Repair Notes
Check battery and cable connections. Verify PCM power fuse. Clean and secure all connections.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
P1600 on Other Vehicles
Common Questions
What does code P1600 mean on a 2004-2007 Buick Rainier?
P1600 stands for "PCM Battery Direct Power Circuit". The PCM detected an issue with its direct battery power supply circuit. This circuit maintains PCM memory and learned values when the ignition is off.
What are the symptoms of P1600 on a Buick Rainier?
Common symptoms of P1600 include: Check Engine Light, Lost adaptive memory, Poor idle after battery service, Transmission relearn needed, Multiple codes may set simultaneously.
What causes P1600 on a 2004-2007 Buick Rainier?
Common causes of P1600 include: Low battery voltage, Corroded battery cables, Loose PCM power connection, Blown PCM power fuse, Damaged PCM power wiring.