IAT Sensor Circuit Intermittent High Voltage
2013-2013 Cadillac ATS 3.6L V6
The 2013 Cadillac ATS is equipped with a 3.6L V6 engine. Below you'll find detailed p1111 diagnostic code information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.
Description
The PCM detected intermittent high voltage on the Intake Air Temperature sensor circuit, indicating a sporadic open circuit or connection issue.
Symptoms
- Check Engine Light (intermittent)
- Incorrect fueling in cold weather
- Poor fuel economy
- Intermittent performance issues
Common Causes
- Loose IAT sensor connector
- Intermittent open in wiring
- Faulty IAT sensor
- Corroded terminals
Diagnostic Steps
- Wiggle test IAT connector while monitoring signal
- Inspect wiring for damage
- Test IAT sensor resistance
- Check connector terminals
Repair Notes
Clean and secure IAT sensor connector. Replace sensor if resistance is out of spec.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
P1111 on Other Vehicles
Common Questions
What does code P1111 mean on a 2013-2013 Cadillac ATS?
P1111 stands for "IAT Sensor Circuit Intermittent High Voltage". The PCM detected intermittent high voltage on the Intake Air Temperature sensor circuit, indicating a sporadic open circuit or connection issue.
What are the symptoms of P1111 on a Cadillac ATS?
Common symptoms of P1111 include: Check Engine Light (intermittent), Incorrect fueling in cold weather, Poor fuel economy, Intermittent performance issues.
What causes P1111 on a 2013-2013 Cadillac ATS?
Common causes of P1111 include: Loose IAT sensor connector, Intermittent open in wiring, Faulty IAT sensor, Corroded terminals.
Last updated: March 2026