U1041moderate severityNetwork
Communication Bus Initialization Failure
on 2007 Cadillac SRX 3.6L V6 · AWD
What this code means
The communication bus failed to initialize properly during vehicle startup.
Symptoms
- Systems slow to come online
- Extended crank before modules respond
- Features not available immediately after start
- Delayed warning light checks
Common causes
- Module power-up sequence issue
- Bus termination problem
- Module not completing initialization
- Power supply slow to stabilize
- Gateway module slow to boot
Diagnostic steps
- Check power supply voltage during cranking
- Monitor bus initialization with scope
- Check gateway module boot sequence
- Verify module power-up order
- Test battery and charging system
Repair notes
Check battery condition and power supply during cranking. Weak battery causes slow initialization.
Other Network codes on this vehicle
U0001
High Speed CAN Communication Bus
U0001
High Speed CAN Communication Bus
U0002
High Speed CAN Communication Bus Performance
U0002
High Speed CAN Communication Bus Performance
U0003
High Speed CAN Communication Bus (+) Open
U0003
High Speed CAN Communication Bus (+) Open
U0004
High Speed CAN Communication Bus (+) Low
U0004
High Speed CAN Communication Bus (+) Low
U0005
High Speed CAN Communication Bus (+) High
U0005
High Speed CAN Communication Bus (+) High