Ignitor Circuit Malfunction
2014-2014 Cadillac SRX 3.0L V6
The 2014 Cadillac SRX is equipped with a 3.0L V6 engine. Below you'll find detailed p1300 diagnostic code information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.
Description
The PCM detected a malfunction in the ignition ignitor circuit. The ignitor is part of the ignition module that controls spark timing and delivery.
Symptoms
- Check Engine Light
- Engine misfires
- Rough running
- No start condition
- Loss of power
Common Causes
- Faulty ignition module
- Damaged ignition coil
- Wiring issue to ignition module
- PCM failure
- Poor ground connection
Diagnostic Steps
- Test ignition module output
- Inspect ignition coils
- Check wiring to ignition module
- Verify ground connections
- Test PCM ignition output signals
Repair Notes
Replace faulty ignition module or coil. Check grounds and wiring first.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
P1300 on Other Vehicles
Common Questions
What does code P1300 mean on a 2014-2014 Cadillac SRX?
P1300 stands for "Ignitor Circuit Malfunction". The PCM detected a malfunction in the ignition ignitor circuit. The ignitor is part of the ignition module that controls spark timing and delivery.
What are the symptoms of P1300 on a Cadillac SRX?
Common symptoms of P1300 include: Check Engine Light, Engine misfires, Rough running, No start condition, Loss of power.
What causes P1300 on a 2014-2014 Cadillac SRX?
Common causes of P1300 include: Faulty ignition module, Damaged ignition coil, Wiring issue to ignition module, PCM failure, Poor ground connection.
Last updated: March 2026