P2419
EVAP Switching Valve Control Circuit Low
2000-2005 Chevrolet Impala 3.4L V6
Low SeverityPowertrainGeneric (SAE)
Description
Low signal on the EVAP system switching valve circuit.
Symptoms
- Check engine light
- EVAP test failure
Common Causes
- Valve circuit short to ground
- Failed valve solenoid
- Wiring damage
Diagnostic Steps
- Check valve connector
- Measure solenoid resistance
- Check wiring
Repair Notes
Replace valve or repair wiring.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
P2419 on Other Vehicles
Chevrolet Astro
1995-2005 4.3L V6 Vortec
Chevrolet Avalanche
2002-2006 5.3L V8 Vortec
Chevrolet Avalanche
2002-2006 8.1L V8 Vortec
Chevrolet Avalanche
2007-2013 5.3L V8 Vortec
Chevrolet Avalanche
2007-2013 6.0L V8 Vortec
Chevrolet Aveo
2012-2018 1.6L I4
Chevrolet Beat
2018-2021 1.2L I4
Chevrolet Beretta
1990-1996 2.2L I4
Common Questions
What does code P2419 mean on a 2000-2005 Chevrolet Impala?
P2419 stands for "EVAP Switching Valve Control Circuit Low". Low signal on the EVAP system switching valve circuit.
What are the symptoms of P2419 on a Chevrolet Impala?
Common symptoms of P2419 include: Check engine light, EVAP test failure.
What causes P2419 on a 2000-2005 Chevrolet Impala?
Common causes of P2419 include: Valve circuit short to ground, Failed valve solenoid, Wiring damage.