Immobilizer Transponder Signal Not Detected
2008-2008 Chevrolet Impala 3.5L V6
The 2008 Chevrolet Impala is equipped with a 3.5L V6 engine. Below you'll find detailed b0101 diagnostic code information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.
Description
The immobilizer system cannot detect the transponder signal from the key. The engine will not start.
Symptoms
- Engine cranks but will not start
- Security light flashing
- Key symbol on dashboard
- No-start condition
Common Causes
- Dead key battery (smart key)
- Faulty transponder chip in key
- Damaged antenna ring around ignition
- Interference from other transponder keys
- Key handle cracked exposing transponder to damage
Diagnostic Steps
- Try different registered key
- Hold key closer to ignition/start button
- Check for key battery (if applicable)
- Test antenna ring with known-good key
- Scan immobilizer codes
Repair Notes
Replace key battery or have new key programmed. Replace antenna ring if faulty.
Related Codes
Other Body Codes
- B0001Driver Frontal Stage 1 Deployment Control
- B0002Driver Frontal Stage 2 Deployment Control
- B0003Passenger Frontal Stage 1 Deployment Control
- B0004Passenger Frontal Stage 2 Deployment Control
- B0005Driver Knee Airbag Deployment Circuit
- B0006Passenger Knee Airbag Deployment Circuit
- B0007Rear Left Side Airbag Deployment Circuit
- B0008Rear Right Side Airbag Deployment Circuit
- B0010Driver Side Airbag Deployment
- B0011Driver Side Airbag Deployment Circuit Open
B0101 on Other Vehicles
Chevrolet Astro
1996-1996 4.3L V6 Vortec
Chevrolet Astro
1997-1997 4.3L V6 Vortec
Chevrolet Astro
1998-1998 4.3L V6 Vortec
Chevrolet Astro
1999-1999 4.3L V6 Vortec
Chevrolet Astro
2000-2000 4.3L V6 Vortec
Chevrolet Astro
2001-2001 4.3L V6 Vortec
Chevrolet Astro
2002-2002 4.3L V6 Vortec
Chevrolet Astro
2003-2003 4.3L V6 Vortec
Common Questions
What does code B0101 mean on a 2008-2008 Chevrolet Impala?
B0101 stands for "Immobilizer Transponder Signal Not Detected". The immobilizer system cannot detect the transponder signal from the key. The engine will not start.
What are the symptoms of B0101 on a Chevrolet Impala?
Common symptoms of B0101 include: Engine cranks but will not start, Security light flashing, Key symbol on dashboard, No-start condition.
What causes B0101 on a 2008-2008 Chevrolet Impala?
Common causes of B0101 include: Dead key battery (smart key), Faulty transponder chip in key, Damaged antenna ring around ignition, Interference from other transponder keys, Key handle cracked exposing transponder to damage.
Last updated: March 2026
View Labor Times | View Torque Specs | View Fluid Specs | View Battery Specs