Seat Belt Tension Sensor - Driver
2012-2012 Chrysler 200 3.6L V6 Pentastar
The 2012 Chrysler 200 is equipped with a 3.6L V6 engine. Below you'll find detailed b0067 diagnostic code information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.
Description
Malfunction in the driver seat belt tension sensor. This sensor monitors seat belt load to optimize restraint system performance.
Symptoms
- Airbag light on
- SRS fault stored
- Restraint optimization degraded
Common Causes
- Faulty tension sensor
- Wiring damage at B-pillar
- Seat belt retractor failure
- Sensor calibration lost
Diagnostic Steps
- Scan SRS codes
- Inspect seat belt tension sensor at retractor
- Check wiring
- Test sensor output with scan tool
Repair Notes
Replace seat belt retractor assembly with integrated tension sensor.
Related Codes
Other Body Codes
- B0001Driver Frontal Stage 1 Deployment Control
- B0002Driver Frontal Stage 2 Deployment Control
- B0003Passenger Frontal Stage 1 Deployment Control
- B0004Passenger Frontal Stage 2 Deployment Control
- B0005Driver Knee Airbag Deployment Circuit
- B0006Passenger Knee Airbag Deployment Circuit
- B0007Rear Left Side Airbag Deployment Circuit
- B0008Rear Right Side Airbag Deployment Circuit
- B0010Driver Side Airbag Deployment
- B0011Driver Side Airbag Deployment Circuit Open
B0067 on Other Vehicles
Chrysler 200
2011-2011 2.4L I4 Tigershark
Chrysler 200
2011-2011 3.6L V6 Pentastar
Chrysler 200
2012-2012 2.4L I4 Tigershark
Chrysler 200
2013-2013 2.4L I4 Tigershark
Chrysler 200
2013-2013 3.6L V6 Pentastar
Chrysler 200
2014-2014 2.4L I4 Tigershark
Chrysler 200
2014-2014 3.6L V6 Pentastar
Chrysler 200
2015-2015 2.4L I4 Tigershark
Common Questions
What does code B0067 mean on a 2012-2012 Chrysler 200?
B0067 stands for "Seat Belt Tension Sensor - Driver". Malfunction in the driver seat belt tension sensor. This sensor monitors seat belt load to optimize restraint system performance.
What are the symptoms of B0067 on a Chrysler 200?
Common symptoms of B0067 include: Airbag light on, SRS fault stored, Restraint optimization degraded.
What causes B0067 on a 2012-2012 Chrysler 200?
Common causes of B0067 include: Faulty tension sensor, Wiring damage at B-pillar, Seat belt retractor failure, Sensor calibration lost.
Last updated: March 2026