Active Roll Control Actuator Circuit Front
2012-2012 Chrysler 200 3.6L V6 Pentastar
The 2012 Chrysler 200 is equipped with a 3.6L V6 engine. Below you'll find detailed c0341 diagnostic code information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.
Description
Malfunction in the front active roll control actuator.
Symptoms
- Front body roll increased
- Warning light on
- Front stabilizer bar ineffective
- Handling loose in corners
Common Causes
- Front actuator motor or valve failure
- Wiring damage
- Actuator seized
- Control module fault
Diagnostic Steps
- Test actuator winding resistance or hydraulic valve
- Command actuator with scan tool
- Inspect for mechanical binding
- Check wiring and connector
Repair Notes
Replace front active roll control actuator.
Related Codes
Other Chassis Codes
- C0021LF Wheel Speed Sensor Range/Performance
- C0022RF Wheel Speed Sensor Range/Performance
- C0023LR Wheel Speed Sensor Range/Performance
- C0024RR Wheel Speed Sensor Range/Performance
- C0025LF Wheel Speed Sensor Circuit Intermittent
- C0026RF Wheel Speed Sensor Circuit Intermittent
- C0027LR Wheel Speed Sensor Circuit Intermittent
- C0028RR Wheel Speed Sensor Circuit Intermittent
- C0035Left Front Wheel Speed Sensor Circuit
- C0036Left Front Wheel Speed Signal Erratic
C0341 on Other Vehicles
Chrysler 200
2011-2011 2.4L I4 Tigershark
Chrysler 200
2011-2011 3.6L V6 Pentastar
Chrysler 200
2012-2012 2.4L I4 Tigershark
Chrysler 200
2013-2013 2.4L I4 Tigershark
Chrysler 200
2013-2013 3.6L V6 Pentastar
Chrysler 200
2014-2014 2.4L I4 Tigershark
Chrysler 200
2014-2014 3.6L V6 Pentastar
Chrysler 200
2015-2015 2.4L I4 Tigershark
Common Questions
What does code C0341 mean on a 2012-2012 Chrysler 200?
C0341 stands for "Active Roll Control Actuator Circuit Front". Malfunction in the front active roll control actuator.
What are the symptoms of C0341 on a Chrysler 200?
Common symptoms of C0341 include: Front body roll increased, Warning light on, Front stabilizer bar ineffective, Handling loose in corners.
What causes C0341 on a 2012-2012 Chrysler 200?
Common causes of C0341 include: Front actuator motor or valve failure, Wiring damage, Actuator seized, Control module fault.
Last updated: March 2026