Steering Torque Sensor Signal Invalid
2021-2021 Chrysler 300 6.4L V8 SRT
The 2021 Chrysler 300 is equipped with a 6.4L V8 engine. Below you'll find detailed c0082 diagnostic code information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.
Description
The steering torque sensor signal is implausible or does not match expected values.
Symptoms
- EPS warning light
- Steering assist intermittent
- Power steering cuts out momentarily
- Stability control affected
Common Causes
- Torque sensor calibration lost
- Sensor mechanical damage
- Connector pin damage
- Electromagnetic interference near sensor
Diagnostic Steps
- Monitor torque sensor live data during steering input
- Check for smooth, proportional signal response
- Inspect connector for bent or damaged pins
- Check for electromagnetic interference sources
- Perform sensor recalibration if supported
Repair Notes
Recalibrate torque sensor. Replace if signal remains erratic.
Related Codes
Other Chassis Codes
- C0021LF Wheel Speed Sensor Range/Performance
- C0022RF Wheel Speed Sensor Range/Performance
- C0023LR Wheel Speed Sensor Range/Performance
- C0024RR Wheel Speed Sensor Range/Performance
- C0025LF Wheel Speed Sensor Circuit Intermittent
- C0026RF Wheel Speed Sensor Circuit Intermittent
- C0027LR Wheel Speed Sensor Circuit Intermittent
- C0028RR Wheel Speed Sensor Circuit Intermittent
- C0035Left Front Wheel Speed Sensor Circuit
- C0036Left Front Wheel Speed Signal Erratic
C0082 on Other Vehicles
Chrysler 200
2011-2011 2.4L I4 Tigershark
Chrysler 200
2011-2011 3.6L V6 Pentastar
Chrysler 200
2012-2012 2.4L I4 Tigershark
Chrysler 200
2012-2012 3.6L V6 Pentastar
Chrysler 200
2013-2013 2.4L I4 Tigershark
Chrysler 200
2013-2013 3.6L V6 Pentastar
Chrysler 200
2014-2014 2.4L I4 Tigershark
Chrysler 200
2014-2014 3.6L V6 Pentastar
Common Questions
What does code C0082 mean on a 2021-2021 Chrysler 300?
C0082 stands for "Steering Torque Sensor Signal Invalid". The steering torque sensor signal is implausible or does not match expected values.
What are the symptoms of C0082 on a Chrysler 300?
Common symptoms of C0082 include: EPS warning light, Steering assist intermittent, Power steering cuts out momentarily, Stability control affected.
What causes C0082 on a 2021-2021 Chrysler 300?
Common causes of C0082 include: Torque sensor calibration lost, Sensor mechanical damage, Connector pin damage, Electromagnetic interference near sensor.
Last updated: March 2026