Electronic Brake Force Distribution Malfunction
2021-2021 Chrysler 300 6.4L V8 SRT
The 2021 Chrysler 300 is equipped with a 6.4L V8 engine. Below you'll find detailed c0140 diagnostic code information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.
Description
The EBD system that proportions brake force between front and rear has detected a fault.
Symptoms
- ABS light on
- Brake warning light on
- Rear wheels may lock under hard braking
- Vehicle pulls to one side during braking
Common Causes
- ABS sensor mismatch between front and rear
- ABS modulator valve fault
- Uneven brake pad wear front to rear
- Brake pressure imbalance
Diagnostic Steps
- Compare all four wheel speed sensor readings during braking
- Check brake pad wear at all four corners
- Inspect ABS modulator valve codes
- Test brake pressure distribution
- Verify tire sizes match
Repair Notes
{"Diagnose underlying ABS or mechanical brake issue. EBD relies on ABS components to function."}
Related Codes
Other Chassis Codes
- C0021LF Wheel Speed Sensor Range/Performance
- C0022RF Wheel Speed Sensor Range/Performance
- C0023LR Wheel Speed Sensor Range/Performance
- C0024RR Wheel Speed Sensor Range/Performance
- C0025LF Wheel Speed Sensor Circuit Intermittent
- C0026RF Wheel Speed Sensor Circuit Intermittent
- C0027LR Wheel Speed Sensor Circuit Intermittent
- C0028RR Wheel Speed Sensor Circuit Intermittent
- C0035Left Front Wheel Speed Sensor Circuit
- C0036Left Front Wheel Speed Signal Erratic
C0140 on Other Vehicles
Chrysler 200
2011-2011 2.4L I4 Tigershark
Chrysler 200
2011-2011 3.6L V6 Pentastar
Chrysler 200
2012-2012 2.4L I4 Tigershark
Chrysler 200
2012-2012 3.6L V6 Pentastar
Chrysler 200
2013-2013 2.4L I4 Tigershark
Chrysler 200
2013-2013 3.6L V6 Pentastar
Chrysler 200
2014-2014 2.4L I4 Tigershark
Chrysler 200
2014-2014 3.6L V6 Pentastar
Common Questions
What does code C0140 mean on a 2021-2021 Chrysler 300?
C0140 stands for "Electronic Brake Force Distribution Malfunction". The EBD system that proportions brake force between front and rear has detected a fault.
What are the symptoms of C0140 on a Chrysler 300?
Common symptoms of C0140 include: ABS light on, Brake warning light on, Rear wheels may lock under hard braking, Vehicle pulls to one side during braking.
What causes C0140 on a 2021-2021 Chrysler 300?
Common causes of C0140 include: ABS sensor mismatch between front and rear, ABS modulator valve fault, Uneven brake pad wear front to rear, Brake pressure imbalance.
Last updated: March 2026