P0740
Torque Converter Clutch Circuit Malfunction
2004-2008 Chrysler Pacifica 3.5L V6
Moderate SeverityPowertrainGeneric (SAE)
Description
Malfunction in the torque converter clutch (TCC) solenoid circuit.
Symptoms
- Check Engine Light
- No lockup feel (higher RPM at highway)
- Poor fuel economy
- Transmission overheating
Common Causes
- Faulty TCC solenoid
- Wiring issue
- PCM driver failure
- Torque converter failure
Diagnostic Steps
- Test TCC solenoid resistance
- Check wiring
- Command TCC engagement with scan tool
- Monitor RPM drop during lockup command
Repair Notes
Replace TCC solenoid or repair wiring. Solenoid is often inside transmission.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
P0740 on Other Vehicles
Common Questions
What does code P0740 mean on a 2004-2008 Chrysler Pacifica?
P0740 stands for "Torque Converter Clutch Circuit Malfunction". Malfunction in the torque converter clutch (TCC) solenoid circuit.
What are the symptoms of P0740 on a Chrysler Pacifica?
Common symptoms of P0740 include: Check Engine Light, No lockup feel (higher RPM at highway), Poor fuel economy, Transmission overheating.
What causes P0740 on a 2004-2008 Chrysler Pacifica?
Common causes of P0740 include: Faulty TCC solenoid, Wiring issue, PCM driver failure, Torque converter failure.