P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
2008-2014 Dodge Avenger 3.6L V6
Moderate SeverityPowertrainGeneric (SAE)
Description
The PCM detected a malfunction in the intake camshaft position actuator circuit for Bank 1. The VVT solenoid controls oil flow to the camshaft phaser.
Symptoms
- Check Engine Light
- Rough idle
- Reduced power
- Engine rattle on startup
Common Causes
- Faulty VVT solenoid
- Low oil level or dirty oil
- Wiring issue
- Camshaft phaser failure
Diagnostic Steps
- Check engine oil level and condition
- Test VVT solenoid resistance
- Inspect wiring to solenoid
- Command solenoid on/off with scan tool
- Check oil pressure
Repair Notes
Replace VVT solenoid or repair wiring. Ensure oil is clean and at proper level.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
- P0016Crankshaft Position/Camshaft Position Correlation Bank 1 Sensor A
P0010 on Other Vehicles
Common Questions
What does code P0010 mean on a 2008-2014 Dodge Avenger?
P0010 stands for "Intake Camshaft Position Actuator Circuit/Open Bank 1". The PCM detected a malfunction in the intake camshaft position actuator circuit for Bank 1. The VVT solenoid controls oil flow to the camshaft phaser.
What are the symptoms of P0010 on a Dodge Avenger?
Common symptoms of P0010 include: Check Engine Light, Rough idle, Reduced power, Engine rattle on startup.
What causes P0010 on a 2008-2014 Dodge Avenger?
Common causes of P0010 include: Faulty VVT solenoid, Low oil level or dirty oil, Wiring issue, Camshaft phaser failure.