B1002
TPMS Sensor Circuit - Left Rear
2008-2008 Dodge Charger 2.7L V6
Low SeverityBodyGeneric (SAE)
The 2008 Dodge Charger is equipped with a 2.7L V6 engine. Below you'll find detailed b1002 diagnostic code information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.
Description
Malfunction in the left rear tire pressure monitoring sensor.
Symptoms
- TPMS warning light on
- Left rear pressure not displayed
- Dashes shown for this wheel position
Common Causes
- Dead sensor battery
- Faulty sensor
- Sensor damaged during tire change
- Sensor not programmed
Diagnostic Steps
- Trigger sensor
- Check programming
- Inspect sensor condition
- Verify battery
Repair Notes
Replace TPMS sensor and program to vehicle.
Related Codes
Other Body Codes
- B0001Driver Frontal Stage 1 Deployment Control
- B0002Driver Frontal Stage 2 Deployment Control
- B0003Passenger Frontal Stage 1 Deployment Control
- B0004Passenger Frontal Stage 2 Deployment Control
- B0005Driver Knee Airbag Deployment Circuit
- B0006Passenger Knee Airbag Deployment Circuit
- B0007Rear Left Side Airbag Deployment Circuit
- B0008Rear Right Side Airbag Deployment Circuit
- B0010Driver Side Airbag Deployment
- B0011Driver Side Airbag Deployment Circuit Open
B1002 on Other Vehicles
Common Questions
What does code B1002 mean on a 2008-2008 Dodge Charger?
B1002 stands for "TPMS Sensor Circuit - Left Rear". Malfunction in the left rear tire pressure monitoring sensor.
What are the symptoms of B1002 on a Dodge Charger?
Common symptoms of B1002 include: TPMS warning light on, Left rear pressure not displayed, Dashes shown for this wheel position.
What causes B1002 on a 2008-2008 Dodge Charger?
Common causes of B1002 include: Dead sensor battery, Faulty sensor, Sensor damaged during tire change, Sensor not programmed.
Last updated: March 2026