B0241low severityBody
Sunroof Position Sensor Circuit
on 2011 Dodge Charger 5.7L V8 Hemi · AWD
What this code means
The sunroof position sensor is not providing valid position data, preventing the auto-close feature from functioning.
Symptoms
- One-touch sunroof open/close not working
- Sunroof does not auto-reverse on obstruction
- Express open/close disabled
- Sunroof control module fault
Common causes
- Faulty position sensor
- Sensor wiring damage
- Sunroof motor encoder failure
- Control module needs initialization
Diagnostic steps
- Perform sunroof initialization procedure
- Check position sensor wiring
- Test sensor output during movement
- Inspect motor encoder
Repair notes
Re-initialize sunroof per manufacturer procedure. Replace motor assembly if encoder is faulty.
Other Body codes on this vehicle
B0001
Driver Frontal Stage 1 Deployment Control
B0001
Driver Frontal Stage 1 Deployment Control
B0002
Driver Frontal Stage 2 Deployment Control
B0002
Driver Frontal Stage 2 Deployment Control
B0003
Passenger Frontal Stage 1 Deployment Control
B0003
Passenger Frontal Stage 1 Deployment Control
B0004
Passenger Frontal Stage 2 Deployment Control
B0004
Passenger Frontal Stage 2 Deployment Control
B0005
Driver Knee Airbag Deployment Circuit
B0005
Driver Knee Airbag Deployment Circuit