C0096moderate severityChassis
Brake Lamp Switch Circuit 2 Malfunction
on 2011 Dodge Charger 5.7L V8 Hemi · AWD
What this code means
The secondary or redundant brake lamp switch input to the ABS/stability module is faulty.
Symptoms
- ABS light on
- Stability control disabled
- Cruise control inoperative
- Brake light inconsistency detected
Common causes
- Secondary brake switch failure
- Wiring fault in redundant circuit
- ABS module input fault
- Switch adjustment incorrect
Diagnostic steps
- Test both brake switch circuits
- Compare primary and secondary switch signals
- Adjust switch if out of specification
- Inspect wiring to ABS module
- Check both switch inputs at module connector
Repair notes
Adjust or replace secondary brake lamp switch.
Other Chassis codes on this vehicle
C0021
LF Wheel Speed Sensor Range/Performance
C0021
LF Wheel Speed Sensor Range/Performance
C0022
RF Wheel Speed Sensor Range/Performance
C0022
RF Wheel Speed Sensor Range/Performance
C0023
LR Wheel Speed Sensor Range/Performance
C0023
LR Wheel Speed Sensor Range/Performance
C0024
RR Wheel Speed Sensor Range/Performance
C0024
RR Wheel Speed Sensor Range/Performance
C0025
LF Wheel Speed Sensor Circuit Intermittent
C0025
LF Wheel Speed Sensor Circuit Intermittent