Back to 2011 Dodge Charger

2011 DODGE CHARGER

5.7L V8 HemiAWDAUTOMATICgas
11 active safety recalls on this vehicle — view recalls
Repairs0Labor1016Torque8695Fluid16DTC1788Battery0Maintenance0Recalls11
C0105moderate severityChassis

Brake Pedal Position Sensor Circuit Low

on 2011 Dodge Charger 5.7L V8 Hemi · AWD

What this code means

The brake pedal position sensor signal voltage is below the minimum threshold.

Symptoms

  • ABS light on
  • Brake assist fault
  • Module reads brake as always applied

Common causes

  • Short to ground in sensor circuit
  • Faulty sensor
  • Low supply voltage to sensor

Diagnostic steps

  1. Test sensor signal voltage
  2. Check for shorts to ground
  3. Verify supply voltage at sensor
  4. Inspect wiring harness

Repair notes

Repair short circuit or replace brake pedal position sensor.

Other Chassis codes on this vehicle

Building an app?
Free API access to all this data — 50 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →