Lateral Acceleration Sensor Circuit
2005-2005 Dodge Dakota 3.7L V6
The 2005 Dodge Dakota is equipped with a 3.7L V6 engine. Below you'll find detailed c0073 diagnostic code information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.
Description
Malfunction in the lateral acceleration sensor, which measures side-to-side G-forces on the vehicle.
Symptoms
- Stability control light on
- ESC disabled
- Rollover protection may be disabled
- Traction control affected
Common Causes
- Faulty lateral acceleration sensor
- Sensor connector corroded
- Wiring damage
- Sensor mounting issue
Diagnostic Steps
- Read lateral G sensor with scan tool (should be near zero on level ground)
- Inspect sensor connector and wiring
- Check sensor mounting bracket
- Perform sensor calibration
- Compare to yaw rate sensor data for plausibility
Repair Notes
Calibrate lateral acceleration sensor. Replace if output is erratic.
Related Codes
Other Chassis Codes
- C0021LF Wheel Speed Sensor Range/Performance
- C0022RF Wheel Speed Sensor Range/Performance
- C0023LR Wheel Speed Sensor Range/Performance
- C0024RR Wheel Speed Sensor Range/Performance
- C0025LF Wheel Speed Sensor Circuit Intermittent
- C0026RF Wheel Speed Sensor Circuit Intermittent
- C0027LR Wheel Speed Sensor Circuit Intermittent
- C0028RR Wheel Speed Sensor Circuit Intermittent
- C0035Left Front Wheel Speed Sensor Circuit
- C0036Left Front Wheel Speed Signal Erratic
C0073 on Other Vehicles
Common Questions
What does code C0073 mean on a 2005-2005 Dodge Dakota?
C0073 stands for "Lateral Acceleration Sensor Circuit". Malfunction in the lateral acceleration sensor, which measures side-to-side G-forces on the vehicle.
What are the symptoms of C0073 on a Dodge Dakota?
Common symptoms of C0073 include: Stability control light on, ESC disabled, Rollover protection may be disabled, Traction control affected.
What causes C0073 on a 2005-2005 Dodge Dakota?
Common causes of C0073 include: Faulty lateral acceleration sensor, Sensor connector corroded, Wiring damage, Sensor mounting issue.
Last updated: March 2026