Crankshaft Position/Camshaft Position Correlation Bank 1 Sensor A
2007-2007 Dodge Dakota 4.7L V8
The 2007 Dodge Dakota is equipped with a 4.7L V8 engine. Below you'll find detailed p0016 diagnostic code information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.
Description
The PCM detected that the crankshaft position and Bank 1 intake camshaft position signals are not correlating properly.
Symptoms
- Check Engine Light
- Engine may not start
- Rough running
- Loss of power
- Engine noise
Common Causes
- Timing chain stretched or jumped
- VVT solenoid failure
- Tone ring damage
- Sensor failure
- Oil issues affecting VVT
Diagnostic Steps
- Check timing chain alignment marks
- Inspect VVT solenoid
- Test crank and cam sensors
- Check oil condition
- Inspect tone rings
Repair Notes
If timing chain has jumped, replace chain, guides, and tensioner. Check VVT system.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
P0016 on Other Vehicles
Common Questions
What does code P0016 mean on a 2007-2007 Dodge Dakota?
P0016 stands for "Crankshaft Position/Camshaft Position Correlation Bank 1 Sensor A". The PCM detected that the crankshaft position and Bank 1 intake camshaft position signals are not correlating properly.
What are the symptoms of P0016 on a Dodge Dakota?
Common symptoms of P0016 include: Check Engine Light, Engine may not start, Rough running, Loss of power, Engine noise.
What causes P0016 on a 2007-2007 Dodge Dakota?
Common causes of P0016 include: Timing chain stretched or jumped, VVT solenoid failure, Tone ring damage, Sensor failure, Oil issues affecting VVT.
Last updated: March 2026