P0338
Crankshaft Position Sensor A Circuit High Input
2007-2007 Dodge Dakota 4.7L V8
High SeverityPowertrainGeneric (SAE)
The 2007 Dodge Dakota is equipped with a 4.7L V8 engine. Below you'll find detailed p0338 diagnostic code information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.
Description
High signal from CKP sensor.
Symptoms
- Check Engine Light
- No start
- Erratic operation
Common Causes
- Short to voltage
- Faulty sensor
- Wiring issue
Diagnostic Steps
- Test signal voltage
- Check for shorts to power
Repair Notes
Replace sensor or repair wiring.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
P0338 on Other Vehicles
Common Questions
What does code P0338 mean on a 2007-2007 Dodge Dakota?
P0338 stands for "Crankshaft Position Sensor A Circuit High Input". High signal from CKP sensor.
What are the symptoms of P0338 on a Dodge Dakota?
Common symptoms of P0338 include: Check Engine Light, No start, Erratic operation.
What causes P0338 on a 2007-2007 Dodge Dakota?
Common causes of P0338 include: Short to voltage, Faulty sensor, Wiring issue.
Last updated: March 2026