P0717
Input/Turbine Speed Sensor Circuit No Signal
2007-2007 Dodge Dakota 4.7L V8
High SeverityPowertrainGeneric (SAE)
The 2007 Dodge Dakota is equipped with a 4.7L V8 engine. Below you'll find detailed p0717 diagnostic code information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.
Description
No signal from the input speed sensor.
Symptoms
- No shifting
- Limp mode
- Stuck in gear
Common Causes
- Faulty sensor
- Open wiring
- Disconnected connector
Diagnostic Steps
- Test sensor signal
- Check wiring
- Verify connector
Repair Notes
Replace sensor or repair wiring.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
P0717 on Other Vehicles
Common Questions
What does code P0717 mean on a 2007-2007 Dodge Dakota?
P0717 stands for "Input/Turbine Speed Sensor Circuit No Signal". No signal from the input speed sensor.
What are the symptoms of P0717 on a Dodge Dakota?
Common symptoms of P0717 include: No shifting, Limp mode, Stuck in gear.
What causes P0717 on a 2007-2007 Dodge Dakota?
Common causes of P0717 include: Faulty sensor, Open wiring, Disconnected connector.
Last updated: March 2026