Steering Torque Sensor Signal Invalid
2004-2004 Ferrari 360 Modena 3.6L V8
The 2004 Ferrari 360 Modena is equipped with a 3.6L V8 engine. Below you'll find detailed c0082 diagnostic code information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.
Description
The steering torque sensor signal is implausible or does not match expected values.
Symptoms
- EPS warning light
- Steering assist intermittent
- Power steering cuts out momentarily
- Stability control affected
Common Causes
- Torque sensor calibration lost
- Sensor mechanical damage
- Connector pin damage
- Electromagnetic interference near sensor
Diagnostic Steps
- Monitor torque sensor live data during steering input
- Check for smooth, proportional signal response
- Inspect connector for bent or damaged pins
- Check for electromagnetic interference sources
- Perform sensor recalibration if supported
Repair Notes
Recalibrate torque sensor. Replace if signal remains erratic.
Related Codes
Other Chassis Codes
- C0021LF Wheel Speed Sensor Range/Performance
- C0022RF Wheel Speed Sensor Range/Performance
- C0023LR Wheel Speed Sensor Range/Performance
- C0024RR Wheel Speed Sensor Range/Performance
- C0025LF Wheel Speed Sensor Circuit Intermittent
- C0026RF Wheel Speed Sensor Circuit Intermittent
- C0027LR Wheel Speed Sensor Circuit Intermittent
- C0028RR Wheel Speed Sensor Circuit Intermittent
- C0035Left Front Wheel Speed Sensor Circuit
- C0036Left Front Wheel Speed Signal Erratic
C0082 on Other Vehicles
Ferrari 296 GTB
2022-2022 3.0L V6 Hybrid
Ferrari 296 GTB
2023-2023 3.0L V6 Hybrid
Ferrari 296 GTB
2024-2024 3.0L V6 Hybrid
Ferrari 296 GTS
2022-2022 3.0L V6 Hybrid
Ferrari 296 GTS
2023-2023 3.0L V6 Hybrid
Ferrari 296 GTS
2024-2024 3.0L V6 Hybrid
Ferrari 360 Challenge Stradale
2003-2003 3.6L V8
Ferrari 360 Challenge Stradale
2005-2005 3.6L V8
Common Questions
What does code C0082 mean on a 2004-2004 Ferrari 360 Modena?
C0082 stands for "Steering Torque Sensor Signal Invalid". The steering torque sensor signal is implausible or does not match expected values.
What are the symptoms of C0082 on a Ferrari 360 Modena?
Common symptoms of C0082 include: EPS warning light, Steering assist intermittent, Power steering cuts out momentarily, Stability control affected.
What causes C0082 on a 2004-2004 Ferrari 360 Modena?
Common causes of C0082 include: Torque sensor calibration lost, Sensor mechanical damage, Connector pin damage, Electromagnetic interference near sensor.
Last updated: March 2026