Convertible Top Position Sensor
2002-2004 Ferrari Enzo 6.0L V12
Description
The convertible top position sensor is not reporting valid data, preventing automatic top operation.
Symptoms
- Top auto-open/close not working
- Top stops at random positions
- Must manually assist top movement
- Control module error
Common Causes
- Faulty position sensor
- Sensor wiring damage
- Sensor misaligned
- Control module needs recalibration
Diagnostic Steps
- Check position sensor output
- Inspect sensor alignment
- Test wiring
- Attempt recalibration procedure
Repair Notes
Replace or realign position sensor. Recalibrate top control module.
Related Codes
Other Body Codes
- B0001Driver Frontal Stage 1 Deployment Control
- B0002Driver Frontal Stage 2 Deployment Control
- B0003Passenger Frontal Stage 1 Deployment Control
- B0004Passenger Frontal Stage 2 Deployment Control
- B0005Driver Knee Airbag Deployment Circuit
- B0006Passenger Knee Airbag Deployment Circuit
- B0010Driver Side Airbag Deployment
- B0011Driver Side Airbag Deployment Circuit Open
- B0012Driver Side Airbag Deployment Circuit Short to Ground
- B0013Driver Side Airbag Deployment Circuit Short to Battery
B0261 on Other Vehicles
Ferrari 296 GTB
2022-2024 3.0L V6 Hybrid
Ferrari 296 GTS
2022-2024 3.0L V6 Hybrid
Ferrari 360 Challenge Stradale
2003-2005 3.6L V8
Ferrari 360 Modena
1999-2005 3.6L V8
Ferrari 430 Scuderia
2007-2009 4.3L V8
Ferrari 456 GT
1993-2003 5.5L V12
Ferrari 458 Italia
2009-2015 4.5L V8
Ferrari 458 Speciale
2013-2015 4.5L V8
Common Questions
What does code B0261 mean on a 2002-2004 Ferrari Enzo?
B0261 stands for "Convertible Top Position Sensor". The convertible top position sensor is not reporting valid data, preventing automatic top operation.
What are the symptoms of B0261 on a Ferrari Enzo?
Common symptoms of B0261 include: Top auto-open/close not working, Top stops at random positions, Must manually assist top movement, Control module error.
What causes B0261 on a 2002-2004 Ferrari Enzo?
Common causes of B0261 include: Faulty position sensor, Sensor wiring damage, Sensor misaligned, Control module needs recalibration.