Backup Camera Circuit Malfunction
2011-2014 Ford Edge 3.5L V6
Description
Malfunction in the rearview/backup camera system. The camera does not display an image when reversing.
Symptoms
- No image when in reverse
- Camera image frozen
- Camera display is black
- Camera image has lines or distortion
- Delay in camera image appearing
Common Causes
- Faulty backup camera
- Camera lens dirty or fogged
- Wiring damage at trunk/liftgate hinge
- Camera module water intrusion
- Head unit video input fault
Diagnostic Steps
- Clean camera lens
- Check camera connector at trunk hinge area
- Test camera power and ground
- Inspect wiring for damage at hinge flex point
- Test video input at head unit
Repair Notes
Clean camera lens first. Replace camera if water-damaged. Repair wiring at hinge flex point.
Related Codes
Other Body Codes
- B0001Driver Frontal Stage 1 Deployment Control
- B0002Driver Frontal Stage 2 Deployment Control
- B0003Passenger Frontal Stage 1 Deployment Control
- B0004Passenger Frontal Stage 2 Deployment Control
- B0005Driver Knee Airbag Deployment Circuit
- B0006Passenger Knee Airbag Deployment Circuit
- B0007Rear Left Side Airbag Deployment Circuit
- B0008Rear Right Side Airbag Deployment Circuit
- B0010Driver Side Airbag Deployment
- B0011Driver Side Airbag Deployment Circuit Open
B2300 on Other Vehicles
Ford Bronco
2021-2024 2.3L I4 EcoBoost
Ford Bronco
2021-2024 2.7L V6 EcoBoost
Ford Bronco Raptor
2022-2024 3.0L V6 EcoBoost
Ford Bronco Sport
2021-2024 1.5L I3 EcoBoost
Ford Bronco Sport
2021-2024 2.0L I4 EcoBoost
Ford Crown Victoria
1998-2011 4.6L V8 Modular 2V
Ford E-150
1997-2014 4.6L V8 Triton
Ford E-150
1997-2014 5.4L V8 Triton
Common Questions
What does code B2300 mean on a 2011-2014 Ford Edge?
B2300 stands for "Backup Camera Circuit Malfunction". Malfunction in the rearview/backup camera system. The camera does not display an image when reversing.
What are the symptoms of B2300 on a Ford Edge?
Common symptoms of B2300 include: No image when in reverse, Camera image frozen, Camera display is black, Camera image has lines or distortion, Delay in camera image appearing.
What causes B2300 on a 2011-2014 Ford Edge?
Common causes of B2300 include: Faulty backup camera, Camera lens dirty or fogged, Wiring damage at trunk/liftgate hinge, Camera module water intrusion, Head unit video input fault.