Lost Communication with Remote Start Module
2002-2005 Ford Explorer 4.6L V8
Description
Cannot communicate with the remote start control module.
Symptoms
- Remote start not functioning
- Remote start LED not indicating
- Engine does not crank from remote
- Remote start warning message
Common Causes
- Remote start module failure
- CAN bus wiring
- Module power loss
- Fuse blown
- Hood switch open
- Security system conflict
Diagnostic Steps
- Check remote start module fuse
- Test power and ground
- Check CAN wiring
- Verify hood switch closed
- Check for security system DTCs
- Test remote start trigger signal
Repair Notes
Check fuses and hood switch (must show closed for remote start). Verify no security DTCs present.
Related Codes
Other Network Codes
- U0001High Speed CAN Communication Bus
- U0001High Speed CAN Communication Bus
- U0001High Speed CAN Communication Bus
- U0002High Speed CAN Communication Bus Performance
- U0002High Speed CAN Communication Bus Performance
- U0002High Speed CAN Communication Bus Performance
- U0003High Speed CAN Communication Bus (+) Open
- U0003High Speed CAN Communication Bus (+) Open
- U0003High Speed CAN Communication Bus (+) Open
- U0004High Speed CAN Communication Bus (+) Low
U0214 on Other Vehicles
Ford Bronco
2021-2024 2.3L I4 EcoBoost
Ford Bronco
2021-2024 2.7L V6 EcoBoost
Ford Bronco Raptor
2022-2024 3.0L V6 EcoBoost
Ford Bronco Sport
2021-2024 1.5L I3 EcoBoost
Ford Bronco Sport
2021-2024 2.0L I4 EcoBoost
Ford Crown Victoria
1998-2011 4.6L V8 Modular 2V
Ford E-150
1997-2014 4.6L V8 Triton
Ford E-150
1997-2014 5.4L V8 Triton
Common Questions
What does code U0214 mean on a 2002-2005 Ford Explorer?
U0214 stands for "Lost Communication with Remote Start Module". Cannot communicate with the remote start control module.
What are the symptoms of U0214 on a Ford Explorer?
Common symptoms of U0214 include: Remote start not functioning, Remote start LED not indicating, Engine does not crank from remote, Remote start warning message.
What causes U0214 on a 2002-2005 Ford Explorer?
Common causes of U0214 include: Remote start module failure, CAN bus wiring, Module power loss, Fuse blown, Hood switch open, Security system conflict.