Initial Setup Not Complete
2011-2015 Ford Explorer 3.5L V6
Description
The vehicle or module initial setup procedure has not been completed. Required after major module replacement.
Symptoms
- Multiple systems in limited mode
- Features not available
- Setup reminder messages
- Module self-tests not passed
Common Causes
- Post-replacement setup not done
- Battery disconnect reset setup flags
- Module replacement without completing setup
- Programming interrupted during setup
Diagnostic Steps
- Run complete vehicle setup procedure
- Perform module initialization sequence
- Complete all post-replacement steps per service manual
- Verify each system completes self-test
Repair Notes
Complete the full post-service initialization procedure per manufacturer service manual.
Related Codes
Other Network Codes
- U0001High Speed CAN Communication Bus
- U0001High Speed CAN Communication Bus
- U0002High Speed CAN Communication Bus Performance
- U0002High Speed CAN Communication Bus Performance
- U0003High Speed CAN Communication Bus (+) Open
- U0003High Speed CAN Communication Bus (+) Open
- U0004High Speed CAN Communication Bus (+) Low
- U0004High Speed CAN Communication Bus (+) Low
- U0005High Speed CAN Communication Bus (+) High
- U0005High Speed CAN Communication Bus (+) High
U2100 on Other Vehicles
Ford Bronco
2021-2024 2.3L I4 EcoBoost
Ford Bronco
2021-2024 2.7L V6 EcoBoost
Ford Bronco Raptor
2022-2024 3.0L V6 EcoBoost
Ford Bronco Sport
2021-2024 1.5L I3 EcoBoost
Ford Bronco Sport
2021-2024 2.0L I4 EcoBoost
Ford Crown Victoria
1998-2011 4.6L V8 Modular 2V
Ford E-150
1997-2014 4.6L V8 Triton
Ford E-150
1997-2014 5.4L V8 Triton
Common Questions
What does code U2100 mean on a 2011-2015 Ford Explorer?
U2100 stands for "Initial Setup Not Complete". The vehicle or module initial setup procedure has not been completed. Required after major module replacement.
What are the symptoms of U2100 on a Ford Explorer?
Common symptoms of U2100 include: Multiple systems in limited mode, Features not available, Setup reminder messages, Module self-tests not passed.
What causes U2100 on a 2011-2015 Ford Explorer?
Common causes of U2100 include: Post-replacement setup not done, Battery disconnect reset setup flags, Module replacement without completing setup, Programming interrupted during setup.