Module Identification Number Not Programmed
2011-2015 Ford Explorer 3.5L V6
Description
The module serial number or identification has not been programmed during setup.
Symptoms
- Module not fully recognized on network
- Security features limited
- Module pairing incomplete
- System reporting module mismatch
Common Causes
- New module not fully programmed
- Serial number transfer not completed
- Module pairing procedure skipped
- Tool did not complete ID programming
Diagnostic Steps
- Perform module identification programming
- Complete module pairing procedure
- Transfer serial number data
- Verify ID stored correctly
- Complete security authorization if required
Repair Notes
Program module identification using manufacturer tool. Some modules require online authorization for ID programming.
Related Codes
Other Network Codes
- U0001High Speed CAN Communication Bus
- U0001High Speed CAN Communication Bus
- U0002High Speed CAN Communication Bus Performance
- U0002High Speed CAN Communication Bus Performance
- U0003High Speed CAN Communication Bus (+) Open
- U0003High Speed CAN Communication Bus (+) Open
- U0004High Speed CAN Communication Bus (+) Low
- U0004High Speed CAN Communication Bus (+) Low
- U0005High Speed CAN Communication Bus (+) High
- U0005High Speed CAN Communication Bus (+) High
U3004 on Other Vehicles
Ford Bronco
2021-2024 2.3L I4 EcoBoost
Ford Bronco
2021-2024 2.7L V6 EcoBoost
Ford Bronco Raptor
2022-2024 3.0L V6 EcoBoost
Ford Bronco Sport
2021-2024 1.5L I3 EcoBoost
Ford Bronco Sport
2021-2024 2.0L I4 EcoBoost
Ford Crown Victoria
1998-2011 4.6L V8 Modular 2V
Ford E-150
1997-2014 4.6L V8 Triton
Ford E-150
1997-2014 5.4L V8 Triton
Common Questions
What does code U3004 mean on a 2011-2015 Ford Explorer?
U3004 stands for "Module Identification Number Not Programmed". The module serial number or identification has not been programmed during setup.
What are the symptoms of U3004 on a Ford Explorer?
Common symptoms of U3004 include: Module not fully recognized on network, Security features limited, Module pairing incomplete, System reporting module mismatch.
What causes U3004 on a 2011-2015 Ford Explorer?
Common causes of U3004 include: New module not fully programmed, Serial number transfer not completed, Module pairing procedure skipped, Tool did not complete ID programming.