HO2S Heater Control Circuit Low Bank 1 Sensor 2
2016-2016 Ford Explorer 3.5L V6 EcoBoost
The 2016 Ford Explorer is equipped with a 3.5L V6 turbocharged gasoline engine. Below you'll find detailed p0037 diagnostic code information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.
Description
The voltage in the Bank 1 Sensor 2 O2 heater circuit is lower than expected.
Symptoms
- Check Engine Light
- Poor catalyst monitoring
Common Causes
- Short to ground
- Faulty sensor
- Corroded connector
Diagnostic Steps
- Test heater voltage
- Check for shorts
- Test resistance
Repair Notes
Repair wiring or replace sensor.
Related Codes
Other Powertrain Codes
- P0001Fuel Volume Regulator Control Circuit/Open
- P0002Fuel Volume Regulator Control Circuit Range/Performance
- P0003Fuel Volume Regulator Control Circuit Low
- P0004Fuel Volume Regulator Control Circuit High
- P0010Intake Camshaft Position Actuator Circuit/Open Bank 1
- P0011Intake Camshaft Position Timing Over-Advanced Bank 1
- P0012Intake Camshaft Position Timing Over-Retarded Bank 1
- P0013Exhaust Camshaft Position Actuator Circuit/Open Bank 1
- P0014Exhaust Camshaft Position Timing Over-Advanced Bank 1
- P0015Exhaust Camshaft Position Timing Over-Retarded Bank 1
P0037 on Other Vehicles
Common Questions
What does code P0037 mean on a 2016-2016 Ford Explorer?
P0037 stands for "HO2S Heater Control Circuit Low Bank 1 Sensor 2". The voltage in the Bank 1 Sensor 2 O2 heater circuit is lower than expected.
What are the symptoms of P0037 on a Ford Explorer?
Common symptoms of P0037 include: Check Engine Light, Poor catalyst monitoring.
What causes P0037 on a 2016-2016 Ford Explorer?
Common causes of P0037 include: Short to ground, Faulty sensor, Corroded connector.
Last updated: March 2026
View Labor Times | View Torque Specs | View Fluid Specs | View Battery Specs