Lost Communication with Forward Camera Module
2016-2016 Ford Explorer 3.5L V6 EcoBoost
The 2016 Ford Explorer is equipped with a 3.5L V6 turbocharged gasoline engine. Below you'll find detailed u0176 diagnostic code information including labor time estimates, cost ranges, and technician notes specific to this engine configuration.
Description
Cannot communicate with the forward-facing camera module for ADAS functions.
Symptoms
- Forward collision warning disabled
- Automatic emergency braking disabled
- Adaptive cruise not available
- Camera blocked message
Common Causes
- Camera module failure
- CAN bus wiring
- Module power loss
- Fuse blown
- Camera blocked or dirty
- Windshield obstruction
Diagnostic Steps
- Check camera module fuse
- Test power and ground
- Check CAN wiring
- Clean camera lens area
- Check for windshield cracks near camera
- Verify camera mounting
Repair Notes
Check fuses and clean camera area. Requires recalibration after windshield replacement or camera service.
Related Codes
Other Network Codes
- U0001High Speed CAN Communication Bus
- U0002High Speed CAN Communication Bus Performance
- U0003High Speed CAN Communication Bus (+) Open
- U0004High Speed CAN Communication Bus (+) Low
- U0005High Speed CAN Communication Bus (+) High
- U0006High Speed CAN Communication Bus (-) Open
- U0007High Speed CAN Communication Bus (-) Low
- U0008High Speed CAN Communication Bus (-) High
- U0009High Speed CAN Communication Bus Shorted Together
- U0010Medium Speed CAN Communication Bus
U0176 on Other Vehicles
Common Questions
What does code U0176 mean on a 2016-2016 Ford Explorer?
U0176 stands for "Lost Communication with Forward Camera Module". Cannot communicate with the forward-facing camera module for ADAS functions.
What are the symptoms of U0176 on a Ford Explorer?
Common symptoms of U0176 include: Forward collision warning disabled, Automatic emergency braking disabled, Adaptive cruise not available, Camera blocked message.
What causes U0176 on a 2016-2016 Ford Explorer?
Common causes of U0176 include: Camera module failure, CAN bus wiring, Module power loss, Fuse blown, Camera blocked or dirty, Windshield obstruction.
Last updated: March 2026
View Labor Times | View Torque Specs | View Fluid Specs | View Battery Specs