TPMS Receiver Module Malfunction
2011-2014 Ford F-150 3.7L V6
Description
Malfunction in the TPMS receiver module that receives RF signals from tire pressure sensors.
Symptoms
- TPMS warning light flashing then solid
- No tire pressures displayed for any wheel
- TPMS system completely inoperative
Common Causes
- Faulty TPMS receiver module
- Receiver antenna disconnected
- Wiring issue
- Module power supply fault
- Aftermarket tint or coating blocking RF signal
Diagnostic Steps
- Check TPMS module power and ground
- Test receiver antenna connection
- Scan TPMS module for codes
- Check for aftermarket window tint with metallic content
- Verify module communication on CAN bus
Repair Notes
Replace TPMS receiver module or repair antenna connection. Metallic window tint can block sensor RF signals.
Related Codes
Other Body Codes
- B0001Driver Frontal Stage 1 Deployment Control
- B0002Driver Frontal Stage 2 Deployment Control
- B0003Passenger Frontal Stage 1 Deployment Control
- B0004Passenger Frontal Stage 2 Deployment Control
- B0005Driver Knee Airbag Deployment Circuit
- B0006Passenger Knee Airbag Deployment Circuit
- B0007Rear Left Side Airbag Deployment Circuit
- B0008Rear Right Side Airbag Deployment Circuit
- B0010Driver Side Airbag Deployment
- B0011Driver Side Airbag Deployment Circuit Open
B1010 on Other Vehicles
Ford Bronco
2021-2024 2.3L I4 EcoBoost
Ford Bronco
2021-2024 2.7L V6 EcoBoost
Ford Bronco Raptor
2022-2024 3.0L V6 EcoBoost
Ford Bronco Sport
2021-2024 1.5L I3 EcoBoost
Ford Bronco Sport
2021-2024 2.0L I4 EcoBoost
Ford Crown Victoria
1998-2011 4.6L V8 Modular 2V
Ford E-150
1997-2014 4.6L V8 Triton
Ford E-150
1997-2014 5.4L V8 Triton
Common Questions
What does code B1010 mean on a 2011-2014 Ford F-150?
B1010 stands for "TPMS Receiver Module Malfunction". Malfunction in the TPMS receiver module that receives RF signals from tire pressure sensors.
What are the symptoms of B1010 on a Ford F-150?
Common symptoms of B1010 include: TPMS warning light flashing then solid, No tire pressures displayed for any wheel, TPMS system completely inoperative.
What causes B1010 on a 2011-2014 Ford F-150?
Common causes of B1010 include: Faulty TPMS receiver module, Receiver antenna disconnected, Wiring issue, Module power supply fault, Aftermarket tint or coating blocking RF signal.